Subtotal: $0.00
The order subtotal is less than the minimum allowed value ($3.90)
Threaded plug Inserts for 10mm kits for use with Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of a 10mm kit tube and drill a blind hole with a 10mm drill bit to the correct depth to accommodate the entire length of the tube and plug. Glue Tube with Plug into the blank and allow to cure—thread to mount onto Handle Anything Chuck with #XPKM-ELC Mandrel Rod along with bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.
Using The Handle Anything Closed End Chuck System
Threaded Plug Inserts for Handle Anything Chuck - 10mm (6 Pack)
The Threaded Plug Inserts are designed for 10mm kits and can be used with the Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of a 10mm kit tube and drill a blind hole with a 10mm drill bit to the correct depth to accomodate the entire length of the tube and plug. Glue the Tube with the Plug into the blank and allow it to cure. Thread to mount onto Handle Anything Chuck with #XPKM-ELC Mandrel Rod and bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.
Using The Handle Anything Closed End Chuck System
