Variable Speed Midi Lathe Conversion Kit - 3/4HP Motor - for Turncrafter Jet & Delta Lathes
Convert your Multi Speed Turncrafter, Jet, or Delta Midi Lathe to a Variable Speed Workhorse.
With this variable speed kit, you can experience infinite and instantaneous speed control with a simple turn of a knob. Easy to set up.
- Convert your lathe from Multi Speed to Variable Speed; Includes 3/4 HP variable speed motor, switch box controller, motor pulley, motor mounting plate, 7mm drill bit, metric allen wrench, and hardware
- 3/4 Horsepower Variable Speed Motor: Shaft is 15mm diameter by 2-1/4" long; Body is 3-3/16" diameter; Length from tip of the shaft to the back of end cap is 9-3/4"
- Three belt positions; #1 650-1450 RPM; #2 1250-2800 RPM; #3 1600-3800 RPM
- 110/120 Volts; 60 Cycles; 1700 RPM; Single phase; Class E
- Compatible with the following lathes: PSI Turncrafter Commander TCLC10 & KWL-1018, Rockler Excelsior 33207, Harbor Freight 65345, Shop Fox W1752, Jet 1015, Rikon 70-105, Delta 46-455, Grizzly H8259, and more
Click here to see if this fits your lathe.
Kit includes nuts, bolts, wiring, control box, motor, motor pulley, assembly templates, and assembly instructions for Turncrafter, Jet, and Delta lathes. Use your existing headstock pulley belt and motor mount and simply mount our variable speed motor to the motor mount. Requires drilling through your motor mounting plate to accept the variable speed motor.
This kit will convert any of the following single-speed lathes to variable speed: Jet Midi Lathe #JML-1014, Delta Midi Lathe #DEL46-455, PSI Midi Lathe #TCLPRO, Rockler Excelsior #33207, Harbor Freight #65345, #Rikon #70-105, #Grizzly #H8259
Conversion Kit Instructions
Specifications
Motor Speeds:
-Belt position 1: 650 - 1450 rpm
-Belt position 2: 1250 - 2800 rpm
-Belt position 3: 1600 - 3800 rpm
Motor:
•HP: 3/4
•Volts: 120V
•Cycles: 60
•RPM: 1700
•Phae: Single
•Class: E
•AMPS: 4.5
Measurements of Motor
•Shaft:
•.549 in dia - 1st of 1/2 of step
•.588 in dia - 2nda of 1/2 of step
•2-1/4in from the tip of the shaft to the top of the motor housing
•9-3/4in the length of the motor from the tip of the shaft to the back of end cap
•Width of motor: 3in
ONLY SHIPS IN CONTINENTAL USA
