Premium Wood Stabilizing Resin (Ultraseal) - 1/2 Gallon
Premium Wood Stabilizer is the first heat-curing methacrylate stabilizer developed specifically to satisfy the needs to discriminating woodworkers. Previous thermocuring wood stabilizers are actually products developed many years ago for the automotive industry, with properties suited for engine block sealing, not wood stabilization. Characteristics like cloudiness, off-color tint, hardness, fluorescence, and retail availability are of little importance to an engine or transmission manufacturer. However, to a serious woodworker, these characteristics are of ultimate importance in guaranteeing the quality of a finished product.
Premium Wood Stabilizer cures crystal clear to a tough, hard finish without the use of fluorescent markers and with low bleed-out, resulting in the excellent turning, sanding, polishing, and aesthetic properties you demand. Premium Wood Stabilizer was developed by an international Laboratory. Premium Wood Stabilizer works in most vacuum stabilization systems, is easy to use, requires little technical support, and is suitable for use with many water-, alcohol-, and oil-soluble dyes.
Premium Wood Stabilizer is a pre-catalyzed blend of methacrylate esters that, when exposed to heat, will polymerize to a hard, clear finish that can be easily sanded and polished to a brilliant finish. Prior to first use or after an extended period of storage, entire contents should be de-gassed by subjecting contents to a vacuum of at least 25 inches of mercury for 30 minutes. Premium Wood Stabilizer will cure when exposed to 194°F (90°C) for at least 10 minutes. Therefore the time required t completely cure a stabilized blank will depend on factors such as wood thickness and density. Premium Wood Stabilizer is compatible with many dyes and stains. However, the manufacturer makes no guarantee or warranty that Premium Wood Stabilizer is compatible with all dyes and stains and will not be liable for any loss due to incompatibility. It is recommended to test compatibility on a small sample first to reduce risk of loss of wood or stabilizer.
- Appearance Clear liquid
- Viscosity 20° C, Sec/t. Zahn: *(32-34s)
- Florescent dye added: No
- Drag Out g/m3: 33
- Shelf life: 12 Months when stored properly
- Odor: Mild
- Specific Gravity @ 20°C: *(1.006-1.013)
- Surface tension: 32 dyne/cm
- Vapor pressure: <1 mm Hg
- Catalyzation Method: Precatalyzed
- Gel Time: 2-5 minutes
- Relative absorption: 36%
- * Under recommended operating and storage conditions
- Cure shrinkage: 13.2%
- Adhesive strength: 56 N/cm2
- Pressure resistance: >12,000 psi
- Co-efficient/lln/exp: 0.000117 per °C
- Swelling H20/96hrs: 10.5 %
- Temperature range: -50/+200° C
Store Premium Wood Stabilizer in a cool dry location below 68° F, refrigeration preferred. Store in original container or in HDPE. Do not store in copper or its alloys, mild steel, or tin.
Shipped via UPS Ground. Continental US only.