Subtotal: $0.00
The order subtotal is less than the minimum allowed value ($3.90)
Butterfly pen blank! A purple butterfly flutters across a "rasta" mix of yellow, red, and green alumalite resins. A subtle, yet distinctive combination! Will fit any mid-size pen.
Purple Butterfly Rotacrylic Pen Blanks
A sparkling dark purple butterfly flutters across a "rasta" mix of bright yellow, red, and emerald alumilite resins. A bright and playful combination! Perfect for the young ladies!
This amazing piece of workmanship involved many hours of design cutting on a CNC, including thousands of lines of code. Once cut, the upper blank was re-cast, in yellow resin. The matching blank for the other barrel has no image.
The pen blank will fit a mid-size pen (Jr Gent II/Jr Statesman/Triton etc). Because of the double casting and the intricate design, there is a chance of encountering a small bubble. If you do, it can easily be filled with some of the white sanding dust and CA or epoxy. These pen blanks have been precision cut on a computer-controlled multi-axis CNC. The image depth on the blank does not vary. But you need to drill straight and in the center of the blank (there are two pilot holes started for you) or the image on the blank will be off-center and will turn away as you turn the blank down. Please refer to the provided instructions.
Painted tubes are recommended.
Watch this short video BEFORE drilling and turning your new Rotacrylic Blank!
https://www.youtube.com/watch?time_continue=5&v=g-5Z8wYDDwE
Great question, thank you! The Rotactylics need at least 1/2" of a diameter. The largest bushing diameter (OD) of the Aromatherapy pen is 0.488. You would be at risk of turning the image away unless you made a slightly curvy (convex) profile where the butterfly image is. I hope that helps! Dawn