The order subtotal is less than the minimum allowed value ($3.90)
From Jeff Powell! This is one in a series of pen blanks to celebrate all those that served the US armed forces. This one is for The Navy. Made from a base of royal pearl blue alumilite resin, we recommend this blank for a larger size pen.
Navy Rotacrylic Pen Blank.
This is one in a series of pen blanks to celebrate all those that served the US armed forces. This one is for The US Navy. The blank is made from a base of a hand poured royal pearl blue alumilite resin, and due to the image wrap, we recommend this blank for a larger size pen.
This amazing piece of workmanship involved many hours of design cutting on a CNC, including thousands of lines of code. Once cut, the upper pen blank was recast, in white resin. The matching blank for the other barrel has no image.
The pen blank will fit a mid size pen (Jr Gent II/Jr Statesman/Triton etc). Because of the double casting and the intricate design, there is a chance of encountering a small bubble. If you do, it can easily be filled with some of the white sanding dust and CA or epoxy. These pen blanks have been precision cut on a computer controlled multi axis CNC. The image depth on the blank does not vary. But you need to drill straight and in the center of the blank (there are two pilot holes started for you) or the image on the blank will be off center and will turn away as you turn the blank down. Please refer to the provided instructions. Painted tubes are recommended.
If you drill on center and you leave at least .6", all of the rotocrylics will yield a full pattern. If the diameter is smaller, you MAY remove some of the detail. Exercise care!!
Watch this video BEFORE drilling and turning your new Rotactylic Blank!
© 2006 - 2021 Exotic Blanks. All rights reserved.