The order subtotal is less than the minimum allowed value ($3.90)
New From Jeff!! And you can help but smile when you look at this blank! What fun and what a great pen it will make for the dentist or dental technician in your life!
You can help but smile when you look at this blank! What fun and what a great pen it will make for the dentist or dental technician in your life!
(Hint: You can easily customize this blank and give it a little of your own personality by adding pupils to the eyes. Just drill and fill!)
Mr. Happy Tooth is white and into a lovely shade of blue. This amazing piece of workmanship involved many hours of design cutting on a CNC, including thousands of lines of code. Once cut, the upper blank was re cast. The matching blank for the other barrel has no image.
The pen blank will fit a mid size pen (Jr Gent II/Jr Statesman/Triton etc). Because of the double casting and the intricate design, there is a chance of encountering a small bubble. If you do, it can easily be filled with some of the white sanding dust and CA or epoxy. These pen blanks have been precision cut on a computer controlled multi axis CNC. The image depth on the blank does not vary. But you need to drill straight and in the center of the blank (there are two pilot holes started for you) or the image on the blank will be off center and will turn away as you turn the blank down. Please refer to the provided instructions. Painted tubes are recommended.
Image measures 1.45" tall
Watch this video BEFORE drilling and turning you new Rotacrylic Blank!
© 2006 - 2021 Exotic Blanks. All rights reserved.