These new blanks have an elegant white winged fairy, flying amongst pearly copper and silver resins. This blank comes as a set with a matching lower blank.
This amazing piece of workmanship involved many hours of design cutting on a CNC, including thousands of lines of code. Once cut, the upper blank was re cast, in white resin. The matching blank for the other barrel has no image.
The blank will fit a mid size pen (Jr Gent II/Jr Statesman/Triton etc). Because of the double casting and the intricate design, there is a chance of encountering a small bubble. If you do, it can easily be filled with some of the white sanding dust and CA or epoxy. These blanks been precision cut on a multi axis CNC. The image depth on the blank does not vary. But you need to drill straight and in the center of the blank (there are two pilot holes started for you) or the image on the blank will be off center and will turn away as you turn the blank down. Please refer to the provided instructions. Painted tubes are recommended.