BVV Wood Stabilizing Resin - 1/2 Gallon
Aerospace approved heat-cured resin for stabilizing and hardening the wood and other porous material. This resin is reusable and does not significantly change the color of most woods.
Prior to first use or after an extended period of storage, entire contents should be de-gassed by subjecting contents to a vacuum of at least 25 inches of mercury for 30 minutes. Wood Stabilizer will cure when exposed to 194°F (90°C) for at least 10 minutes. Therefore the time required t completely cure a stabilized blank will depend on factors such as wood thickness and density.
Wood Stabilizer is compatible with many dyes and stains. However, it is recommended to test compatibility on a small sample first to reduce the risk of loss of wood or stabilizer.
This wood stabilized comes pre-activated. No additional mixing is required. Store the Wood Stabilizer in a cool dry location below 68° F, refrigeration is preferred. Store in the original container or in HDPE.
Exposure to warm external temperatures for an expended period may allow the resin to set up prematurely.
Conus shipping only, ORMD Ground
