BSI Super-Gold Thin Odorless CA Glue

In stock
Not rated yet

SUPER-GOLD and SUPER-GOLD+ are odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes.

Please choose the size of bottle from the drop down menu below.

Mix Group: Adhesives
Buy more for less:
1-2 items $7.95 / each  
3 or more items $7.55 / each save 5%
  • $7.95
Qty:  
  • Weight
    1 oz
  • SKU
    ECA-BSI-121

BSI Super-Gold Thin Odorless CA Glue

SUPER-GOLD and SUPER-GOLD+ are odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. 

Wood can be bonded to white foam with SUPER-GOLD + in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET to one piece and apply SUPER-GOLD+ to the other before joining. Excess INSTA-SET may create too much heat, which can melt the foam. Both SUPER-GOLD’s cure to a more flexible consistency for better shock absorption. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

Available Sizes:
BSI-121: 1/2 oz (14.2 g)
BSI-122: 1 oz. (28.4 g)
BSI-123: 2 oz. (56.8 g)

Mix & Match with other Adhesives to obtain the best quantity discounts!

Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Product questions

No questions yet. Be the first to ask the question!

Directions for Use

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure™ CA to one side of the parts being joined, then hold them tightly together for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive Insta-Set™ accelerator can be sprayed to cure the CA that oozes from  joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.

Related products

Drop items here to shop
Product has been added to your cart