BSI Insta Set CA Accelerator

In stock
Not rated yet

INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization

Available in 3 styles. Please choose from the drop down menu below.

Mix Group: Adhesives
Buy more for less:
1-2 items $3.95 / each  
3 or more items $3.75 / each save 5%
  • $3.95
Qty:  
  • Weight
    3 oz
  • SKU
    ECA-BSI-151

BSI Insta Set CA Accelerator

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Available Sizes:
BSI-151 (Pump Spray): 2 Fl. oz (60 ml)
BSI-152 (Refill): 8 Fl. oz. (240 ml)
BSI-155 (Aerosol): 6.75 Fl. oz. (200 ml)

Mix & Match with other Adhesives to obtain the best quantity discounts!


Directions for Use

After joining parts with cyanoacrylate (CA, super glue), spray the seams with  Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied  to the outside and corners of joints before another application of Insta-Set  to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.

** Aerosols/Accelerators are considered ORM-D and must be shipped Ground.

Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Product questions

No questions yet. Be the first to ask the question!

Directions for Use

After joining parts with cyanoacrylate (CA, super glue), spray the seams with  Insta-Set to cure the CA in 8 seconds. A bead of CA can then be applied  to the outside and corners of joints before another application of Insta-Set  to reinforce their strength. Insta-Set can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.

Related products

Drop items here to shop
Product has been added to your cart