Alumilite Water Clear Casting Resin - 16 lb Kit

In stock
Not rated yet

Alumilite Water Clear produces a high impact rigid clear casting that is commonly used for lenses, encapsulations, and water reproductions. Vacuum or pressure is recommended to achieve 100% bubble free castings. The Water Clear has a new 15-minute open time and a 2-3 hour demold time.  

 

  • $160.00
Qty:  
  • SKU
    DC-10150

Alumilite Water Clear Casting Resin - 16 lb Kit.

Alumilite Water Clear produces a high impact rigid clear casting that is commonly used for lenses, encapsulations, and water reproductions. Vacuum or pressure is recommended to achieve 100% bubble free castings. The Water Clear has a new 15-minute open time and a 2-3 hour demold time. 

Alumilite Clear must be mixed 1:1 by weight. Off-ratio mixing may produce hazy or frosted parts.

Recommended for industrial use only. B side may thicken and need to be warmed before use.

Alumilite is sold and mixed by weight.  16 lb kit includes 8 lbs of side A and 8lbs of side B. (Approx 2 gallons in total)

 

Alumilite Water Clear Instruction Sheet

16lb Kit Shipped UPS Ground, Con US

 

Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Product questions

No questions yet. Be the first to ask the question!
Product Alumilite Water Clear
Color Clear
Mix Ratio (wt. or Vol.) 1:1 by weight
Pot Life (100g mass @ 75 degrees F) 15 minutes
Demold Time (100g mass @ 75 degrees F) 2-3 hours
Mixed Viscosity (cps.) 400
Specific Gravity 1.05
Shore Hardness (ASTM D-2240) 72 D
Shrinkage (in./in.) .005
Tensile Strength (ASTM D-638) (psi) 3,120
Elongation (in./in.) 30-40%
Temperature Resistance 140F