Subtotal: $0.00
The order subtotal is less than the minimum allowed value ($3.90)
Use Alumilite’s Dyes to color your casting and stabilizing resins! Dyes can be used in clear resins for translucent castings, with epoxy for dynamic coatings, or in opaque resin for solid, dynamic colors and in wood stabilizing resins for vibrant and constant colors.
Casting With Alumilite Dyes
Alumilite Dye - White 1oz
Use in Casting
Simply add the dye to the resin and mix well. (For Alumilite resins we recommend adding your dye after A & B sides are completely mixed so that you can ensure there is no fogginess or unmixed resin.) The recommended dye load for casting is 5% by weight. But Alumilite dye colors are highly concentrated, a little will go a long way! For pen blank casting, we recommend using transparent dyes in combination with mica powder, Pearl Ex, Alumidust or Alumilite Metallic Powder. This will add amazing color depth, swirls, and sparkle to your castings!
Use in Wood Stabilizing (not recommended)
Hi Mark, Sorry I dont know, this would be an off-market use. We have never tried and don't have or sell water-based polyurethane (I assume you are referring to something like Minwax), and we have no idea what effect it would have or if it would stand up over time. I would recommend contacting the manufacturer of the water-based polyurethane and see what dye they would recommend or if they have a product where the color is already premixed in for you.