Alumilite Clear SLOW Casting Resin - 16 lb Kit

Alumilite Clear SLOW Casting Resin - 16 lb Kit

Out of stock
Ask a question (1)
Alumilite
Not rated yet

Alumilite Clear SLOW has a 12 min open time and produces a high impact, optically clear casting that can be dyed or pigmented. Turned blanks can be easily polished to a high gloss. Pressure casting is recommended to achieve 100% bubble free castings. 

  • $193.54
  • Weight
    100 oz
  • SKU
    DC-10141

Alumilite Clear SLOW Casting Resin - 16 lb Kit.

Alumilite Clear SLOW has a 12min open time and produces a high impact, optically clear casting that can be dyed or pigmented. This slower setting formula allows for a longer open (working) time, and also a slower cure time and less heat build-up with larger castings.

Turned blanks can be easily polished to a high gloss. Pressure casting is recommended to achieve 100% bubble-free castings. 

Alumilite Clear must be mixed 1:1 by weight. Off-ratio mixing may produce hazy or frosted parts.


Recommended for industrial use only. B side may thicken and need to be warmed before use.

Alumilite is sold and mixed by weight.  16 lb kit includes 8 lbs of side A and 8lbs of side B. (Approx 2 gallons in total)


Alumilite Clear SLOW Instruction Sheet

16lb Kit Shipped UPS Ground, Con US

Alaska, Hawaii, and International customers please contact us about shipping prior to placing an order.

Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Product questions

  • Bryce Acheson
    Dec 17, 2021, 07:27 AM

    Is there a time or temperature of when tinted resin will not blend with other tinted resin?

    Administrator
    Dec 17, 2021, 11:23 AM

    "Alumilite Clear SLOW has a 12min open time" Open time is defined as the time before the resin will gel/set. (Although this may vary a bit depending on your location's ambient temp & humidity).

    You would need to combine the colors before the resin working time is over, and the resin sets up/gels. The temperature of the exothermic reaction when folks like to do this is a personal preference sort of thing. Typically it is done between 95-100.

Product Alumilite Clear Slow
Color Clear
Mix Ratio (wt. or Vol.) 1:1 by WEIGHT
Pot Life 12 minutes
Demold Time (100 gr. Mass) 2-4 hours
Mixed Viscosity (cps.) 400
Specific Gravity 1.04
Shore Hardness (ASTM D-2240) 80 D
Shrinkage (in./in.) .005
Tensile Strength (ASTM D-638) (psi) 3,120
Elongation (in./in.) 30-40%
Temperature Resistance 140F