Mandrels & Centers

Mandrels and Centers for your woodturning lathe.

Products: 143 of 43
  • Keyless Pen Mandrel MT#2

    Keyless Pen Mandrel MT#2

    The quickest and most convenient pen mandrel on the market.

    Not rated yet
    • $29.95
  • Pen Mandrel Saver - choose version

    Pen Mandrel Saver - choose version

    Are you tired of bending your Mandrel and ruining the point on your live center? If so, then this fail-safe live center accessory is for you.

    Not rated yet
    • $16.95
  • Live Tailstock Center w/ 60 Deg Point - #2MT
    • 20% off

    Live Tailstock Center w/ 60 Deg Point - #2MT

    This center is large and strong with precision bearings. It runs very true and is also well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. 1-11/16" overall diameter. #2MT.

    Not rated yet
    • $15.95
  • Berea Morse Taper Driver (Arbor) -  Please Choose Version

    Berea Morse Taper Driver (Arbor) - Please Choose Version

    Precision MT Driver. Will work with shafts "A" or "B" (Berea)

    Not rated yet
    • $9.00
  • Berea Precision Pen Mandrel Shaft

    Berea Precision Pen Mandrel Shaft

    A mandrel is a round steel rod that you slide the wood blank with the brass tube inserted onto. We have two sizes A & B. 

    Please choose from the drop down menu below.

    Not rated yet
    • $8.00
  • Brass Knurled Nut For The Precision Mandrel Shaft (Berea)

    Brass Knurled Nut For The Precision Mandrel Shaft (Berea)

    Brass Knurled Nut for the Berea Mandrel Shafts A & B

    Not rated yet
    • $1.50
  • The "Grabber" Closed End Mandrel System for 2MT Headstock

    The "Grabber" Closed End Mandrel System for 2MT Headstock

    Do you feel limited by the metal ends of your project or length of your project tube? No problem! Now you can easily turn natural "closed ends" on any 7mm or 8mm pen or project. With the new revolutionary and amazingly simple Closed End Pen Mandrel system you can turn a barrel of virtually endless length and design! Your creative possibilities are endless. PSI's patent pending design is advanced it's actually simple. Simply twist the mandrel nut; and the silicone rubber on the mandrel expands and "grabs" the project tube internally. The rubber locks and support the tube as you turn the end. Turn closed ends on nearly any existing 7 and 8mm projects including, pen kits, keychains, letter openers, seam rippers, bottle openers, and more.

    Not rated yet
    • $24.95
  • Bottle Stopper Mandrel - 1" Large

    Bottle Stopper Mandrel - 1" Large

    Turn your custom bottle stopper tops to fit the bottle stopper diameter perfectly with this Bottle Stopper Mandrel.  Precision machined from stainless steel and made in USA. (drill chuck is required for use.)

     

    Not rated yet
    • $7.75
  • Precision Machine Pen Center - 2 MT

    Precision Machine Pen Center - 2 MT

    This MT2 Precision Machine Pen Center eliminates pen mandrel bowing from over-tightening the tailstock. The mandrel applies pressure directly to the bushings and headstock, allowing for a more accurate result and saving time while turning. The mandrel features qualirty sealed ball bearings, that wont wear with continued use

    Fits 7mm pen mandrels.

    Not rated yet
    • $29.95
  • Morse Taper Maxi-Mandrel: 2 Open 7/8 in. Wrenches to Close Collet on Maxi Mandrel

    Morse Taper Maxi-Mandrel: 2 Open 7/8 in. Wrenches to Close Collet on Maxi Mandrel

    2 Open 7/8" wrenches to close collet on Maxi Mandrel
    2 Open 7/8" wrenches to close collet on Maxi Mandrel styles PSI #PKM-ELC and #PKM-FLC

    Score: 5.00 (votes: 1)
    No reviews.
    • $5.95
  • Bottle Stopper Mandrel - 5/8" Pillar/Corkscrew

    Bottle Stopper Mandrel - 5/8" Pillar/Corkscrew

    This 5/8" Bottle Stopper Mandrel is Precision machined from stainless steel and made in the USA. (drill chuck is required for use.)

    Not rated yet
    • $7.75
  • Morse Taper Maxi-Mandrel (Adjustable Length) - MT2

    Morse Taper Maxi-Mandrel (Adjustable Length) - MT2

    #2 Morse Taper Maxi-Mandrel - This new mandrel features a 7mm mandrel shaft that slides through a headstock collet. This feature guarantees a perfectly concentric pen. The mandrel easily adapts to different length projects. Simply mount your tubes and bushings then slide the shaft to the appropriate length and lock it in place. The shorter shaft reduces the likelihood of the mandrel shaft bowing. The collet is tightened with two 7/8" wrenches (NOT included). Maxi-Mandrels include 5 bushings.

    Not rated yet
    • $17.95
  • Replacement Mandrel Rod for the ELC & FLC Mandrel Systems

    Replacement Mandrel Rod for the ELC & FLC Mandrel Systems

    Replacement mandrel shaft for PSI's ELC & FLC mandrel systems.

    Not rated yet
    • $7.75
  • Bottle Stopper Screw Chuck (PSI) - 1" x 8 TPI

    Bottle Stopper Screw Chuck (PSI) - 1" x 8 TPI

    This screw chuck is designed to turn most PSI's Bottle Stopper kits (except BS4, BS6, and BS7). It enables you to turn bottle stoppers on a 1" x 8TPI lathe. Works well with the threaded Bottle stopper inserts.

    Not rated yet
    • $9.95
  • Basic Mandrel  - #2 MT

    Basic Mandrel - #2 MT

    Do you own the Mandrel Saver Tailstock and need to replace your mandrel? This basic mandrel includes 3ea 7mm bushings - for use with Mandrel Saver Tailstock Center. Does NOT include knurled nut or indent for a live tailstock center or a 7mm drill bit.

    Not rated yet
    • $15.95
  • Turn Between Centers Mandrel System  - #2MT

    Turn Between Centers Mandrel System - #2MT

    Turn more accurate, consistent and concentric pen barrels with this one of a kind mandrel system. The Turn Between Centers mandrel rides on 2 centers rather than a typical rod Ð so more accurate, perfectly straight turning. There is no mandrel shaft to bend so youl will eliminate an out of round blank, producing a blank that mates precisely with your pen parts. The system includes a MT headstock insert and live MT tailstock insert - each with 7mm pins (similar to a 7mm mandrel shaft). Mount your bushings onto the pins, mount your pen blank, then bring the tailstock forward to secure your blank between centers. Ideal for single tube pen styles. For #2 Morse Taper Lathes.

    At ExoticBlanks, we include spacers to eliminate the bushing sticking to the pins, no additional charge for improved performance!

    Not rated yet
    • $29.95
  • Turn Between Centers Mandrel System  - #1MT

    Turn Between Centers Mandrel System - #1MT

    Turn more accurate, consistent and concentric pen barrels with this one of a kind mandrel system. The Turn Between Centers mandrel rides on 2 centers rather than a typical rod Ð so more dead on turning. There is no mandrel shaft to bend so your turned barrel will eliminate an out of round blank, producing a blank that mates precisely with your pen parts. The system includes an MT headstock insert and live MT tailstock insert - each with 7mm pins (similar to a 7mm mandrel shaft). Mount your bushings onto the pins, mount your pen blank, then bring the tailstock forward to secure your blank between centers. Ideal for single tube pen styles. For #1 Morse Taper Lathes.

    Score: 5.00 (votes: 2)
    Reviews: 1
    1
    • $29.95
  • Turn Between Centers Mandrel System  - Shopsmith

    Turn Between Centers Mandrel System - Shopsmith

    Shopsmith System for Drill Chuck Headstock Insert System for the Turn Between Centers Mandrel System

    Not rated yet
    • $29.95
  • Bottle Stopper Mandrel - 3/4" Mini

    Bottle Stopper Mandrel - 3/4" Mini

    This 5/8" Bottle Stopper Mandrel is Precision machined from stainless steel and made in the USA. (drill chuck is required for use.)

    Not rated yet
    • $7.75
  • Super Drive Center #2 MT - 1 in. Crown

    Super Drive Center #2 MT - 1 in. Crown

    With this precision engineered Super Drive Center. More teeth give a better bite while providing equal pressure and a positive drive. There is no need to hammer your drive center into the work piece and risk splitting your work

    Not rated yet
    • $22.95
  • Live Tailstock Center - #2 MT

    Live Tailstock Center - #2 MT

    Large and heavy duty live tail stock center with 60° point and ball bearing precision.

    Not rated yet
    • $19.95
  • Live Tailstock Chuck Adapter - #2 MT

    Live Tailstock Chuck Adapter - #2 MT

    Live Tailstock Chuck Adapter - #2MT tailstock mount, 1" x 8tpi Chuck Mount

    Not rated yet
    • $36.95
  • Drive Centers Set for #2MT Lathes - 4 Piece

    Drive Centers Set for #2MT Lathes - 4 Piece

    This 4-Piece center set includes hard to find replacement centers for a lathe equipped with a #2 headstock and tailstock.

    Not rated yet
    • $44.95
  • Multi Spur Drive Center Set - 7 Piece
    • 43% off

    Multi Spur Drive Center Set - 7 Piece

    Always have the right center available for any spindle mounting application. With this convenient, all inclusive 7-piece set you'll have the exact center you need every time. An unbeatable value.

    Not rated yet
    • $59.95
  • Live Tailstock Center - #1 MT

    Live Tailstock Center - #1 MT

    Large and heavy duty live tail stock center with 60° point and ball bearing precision. MT1 Version

    Not rated yet
    • $19.95
  • Live Tailstock Center w/ 60 Deg Point - #1MT

    Live Tailstock Center w/ 60 Deg Point - #1MT

    Live Tailstock Centers w/ 60 deg point - #1MT
    Large and heavy duty with 60° point and ball bearing precision. 1-1/4" overall diameter

    Not rated yet
    • $19.95
  • Super Drive Revolving Tailstock Center - #2MT - 3/4 in. dia

    Super Drive Revolving Tailstock Center - #2MT - 3/4 in. dia

    Super Drive Tailstock Center - 3/4" dia. #2MT

    This multi-tooth live tailstock center provides a great grip with less stress and avoids splitting your wood. It has sealed bearings and spring loaded point for easy positioning and wood removal.

    Not rated yet
    • $42.95
  • Super Drive Revolving Tailstock Center - #1MT

    Super Drive Revolving Tailstock Center - #1MT

    Super Drive Tailstock Center - #1MT

    This multi-tooth live tailstock center provides a great grip with less stress and avoids splitting your wood. It has sealed bearings and spring loaded point for easy positioning and wood removal.

    Not rated yet
    • $42.95
  • Mini 4 Prong Drive Center - #2MT

    Mini 4 Prong Drive Center - #2MT

    With a diameter of only 3/8" this #2MT Mini 4 Prong Drive Center is ideal for turning smaller radius spindles. It also provides easier access to the ends of larger diameter spindles and has many other between center applications. Polished and hardened steel, prongs sharpened for a great grip and control.

    Not rated yet
    • $14.95
  • Live Tailstock Drill Chuck - 1/2 in - #2MT

    Live Tailstock Drill Chuck - 1/2 in - #2MT

    Get precision centering and griping of your work at the tailstock end of your lathe. Ideal for holding mandrels, dowels and tenons up to 1/2" dia. Features smooth precision ball bearing operation. Available for tailstocks that #2 Morse Taper adapter.

    Not rated yet
    • $36.95
  • Headstock Mount Drill Chuck

    Headstock Mount Drill Chuck

    Mount this drill chuck directly onto your headstock. Ideal for headstocks without a morse taper mount and applications that require the most secure headstock connection. The chuck includes a threaded 1 x 8tpi adapter plus a precision drill chuck and chuck key.

    Not rated yet
    • $29.95
  • Ring Crafters Ring Mandrel - Size 4-8.5
    • New!

    Ring Crafters Ring Mandrel - Size 4-8.5

    JDG Ring Crafters Mandrels are a perfect fit for ring makers trying to get started at a lower cost than the stainless steel JDG Pro expanding ring mandrels.

    • Fits Full & Half Size Ring Cores 4-8.5
    • Made from Mild Steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $28.95
  • Professional Ring Mandrel - Half Size 4.5-8.5
    • New!

    Professional Ring Mandrel - Half Size 4.5-8.5

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • Fits Half Size Ring Cores 4.5-8.5
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $44.95
  • Professional Ring Mandrel - Full Size 9-14
    • New!

    Professional Ring Mandrel - Full Size 9-14

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • Fits Full Size Ring Cores 9-14
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $44.95
  • Professional Ring Mandrel - Half Size 9.5-13.5
    • New!

    Professional Ring Mandrel - Half Size 9.5-13.5

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • Fits Half Size Ring Cores 9.5-13.5
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $44.95
  • Professional Ring Mandrel Set - Half Sizes 4.5-13.5 - 2 PC
    • New!
    • 10% less

    Professional Ring Mandrel Set - Half Sizes 4.5-13.5 - 2 PC

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • 2 Piece Set - Half Size Ring Cores 4.5-13.5
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $89.90
  • Professional Ring Mandrel Set - Full Sizes 4-14 - 2 PC
    • New!
    • 10% less

    Professional Ring Mandrel Set - Full Sizes 4-14 - 2 PC

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • 2 Piece Set - Full Size Ring Cores 4 -14
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $89.90
  • Professional Ring Mandrel Set - Full & Half Sizes 4-9 - 2 PC
    • New!
    • 10% less

    Professional Ring Mandrel Set - Full & Half Sizes 4-9 - 2 PC

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • 2 Piece Set - Full & Half Size Ring Cores 4 - 9
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $89.90
  • Professional Ring Mandrel Set - Full & Half Sizes 9-14 - 2 PC
    • New!
    • 10% less

    Professional Ring Mandrel Set - Full & Half Sizes 9-14 - 2 PC

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • 2 Piece Set - Full & Half Size Ring Cores 9-14
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $89.90
  • Professional Ring Mandrel 4 Pc Set - Full & Half Sizes 4-14
    • New!
    • 10% less

    Professional Ring Mandrel 4 Pc Set - Full & Half Sizes 4-14

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • 4 Piece Set - Full & Half Size Ring Cores 4-14
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $179.80
  • Ring Crafters Ring Mandrel - Size 9-13
    • New!

    Ring Crafters Ring Mandrel - Size 9-13

    JDG Ring Crafters Mandrels are a perfect fit for ring makers trying to get started at a lower cost than the stainless steel JDG Pro expanding ring mandrels.

    • Fits Full & Half Size Ring Cores 9-13
    • Made from Mild Steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $28.95
  • Ring Crafters Ring Mandrel Set - Sizes 4-13 - 2 PC
    • New!
    • 10% less

    Ring Crafters Ring Mandrel Set - Sizes 4-13 - 2 PC

    JDG Ring Crafters Mandrels are a perfect fit for ring makers trying to get started at a lower cost than the stainless steel JDG Pro expanding ring mandrels.

    • Fits Full & Half Size Ring Cores 4-13 (2 pc Set)
    • Made from Mild Steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $52.25
  • Professional Ring Mandrel - Full Size 4-9
    • New!

    Professional Ring Mandrel - Full Size 4-9

    The JDG expanding pro ring mandrel fits most ring cores to help make turning rings simple and easy.

    • Fits Full Size Ring Cores 4-9
    • Made from high quality, long lasting stainless steel
    • 1/2" dia. shank for use in a collet or drill chuck.
    Not rated yet
    • $44.95

What's New?