Lathe Chucks

Oneway Stronghold Chuck Kit with 1" x 8 TPI Insert

• Quality materials
• Nickel plated body
• Hardened base jaws
• Manganese phosphate coated scroll
• Single-Hand Key Operation
• Includes: No. 2 profiled jaw set, threaded insert, woodworm screw, t-handle tightening key, 4 mm hex wrench, and owner's manual

Barracuda 4 Powergrip Lathe Chuck for large lathes. Body Only.

Easy Wood Tools Aluminum Faceplate - 1-8 TPI x 4"

• 1” x 8 TPI threads 4” overall diameter
• Solid aluminum, so won’t rust or stain 
• Low profile (1/2” thick plate) to reduce vibration

3" Steel Face Plate,1" x 8 tpi mount. Use this spare faceplate for mounting extra bowl blanks.

• 1” x 8 TPI threads 3” overall diameter
• Low profile

3" Face Plate, 3/4" x 16 tpi mount. Use this spare faceplate for mounting extra bowl blanks. Aluminum w/ 8 mounting holes.

• 3/4” x 16 TPI threads 3” overall diameter
• Aluminum
• Low profile

Adapter From 1-1/4" x 8tpi headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes.

Easy Wood Tools Aluminum Faceplate - 1-1/4" x 8 TPI x 3 1/2"

• 1 1/4" x 8 TPI threads 3 1/4” overall diameter
• Solid aluminum, so won’t rust or stain 
• Comes with Set Screws, 8 Large Mounting Screw Holes and Spanner Hole

Easy Wood Tools Aluminum Faceplate - 1-1/4" x 8 TPI x 4 1/2"

• 1 1/4" x 8 TPI threads 4 1/4” overall diameter
• Solid aluminum, so won’t rust or stain 
• Comes with Set Screws, 8 Large Mounting Screw Holes and Spanner Hole

Easy Wood Tools Aluminum Faceplate - 1-1/4" x 8 TPI x 2 1/2"

• 1 1/4" x 8 TPI threads 2 1/2” overall diameter
• Solid aluminum, so won’t rust or stain 
• Comes with Set Screws, 8 Large Mounting Screw Holes and Spanner Hole

Easy Wood Tools Aluminum Faceplate - 1" x 8 TPI x 2"

• 1" x 8 TPI threads 2” overall diameter
• Solid aluminum, so won’t rust or stain 
• Comes with Set Screws, 8 Large Mounting Screw Holes and Spanner Hole

Our system allows you to create closed ends for a variety of projects, including bottle stoppers, tools, and kitchen utensils. It comes with threaded rods and Standard Pen Mandrel shafts, allowing you to use any bushing to achieve the desired turning size. You can expand the system to create closed-end pen kits, key chains, seam rippers, and custom twist caps.

• The Handle Anything Chuck System lets you turn closed-end pens & handles for various woodturning projects.
• Collet chuck base (PKHA01) is pre-threaded at 1" x 8tpi to mount on your lathe's headstock spindle.
• Includes (2) Stepped Bushings so you have four size guides.
• Includes (2) 7mm threaded mandrel shafts.

This component of the Handle Anything Chuck system is a replacement for the chuck included with the system. It threads onto a 1in x 8tpi headstock thread.

Turn a closed-end Pen Project using the Handle Anything Chuck System. Add a mandrel shaft and threaded plug inserts to turn 7mm, 8mm, 3/8 in., 10mm, 10.5mm, or 12.5mm closed-end pens or projects. Insert the appropriate female threaded plug in the end of your pen tube and secure it by threading it onto the appropriate mandrel shaft. Then slide the shaft into Handle Anything Chuck, secure it at the headstock end, and support it at the tailstock end while you turn.

Replacement 3/8in. x 16 tpi Mandrel rod for the Handle Anything Chuck System (Item #PKHASET)

Replacment 1/2in. x 13tpi Mandrel rod for the Handle Anything Chuck System (Item #PKHASET)

Easy Wood Tools 4 Inch Easy Chuck. 1.25" -8TPI

• The easiest chuck you'll ever use!
• Snap-Lock Technology (SLT)
• Change jaws in 30 seconds or less
• Jaws can be placed in any configuration, no longer sequential
• Includes 1-3/8" Dovetail Jaws and 1.25"-8 tpi Easy Chuck

This inexpensive Apprentice Mini 4-Jaw Chuck is perfect for small projects and for use on today’s mini lathes where larger chucks can be too much"  The convenient key operated design allows for one-hand operation and provides a tenacious grip.  Precision machined for smooth, trouble-free operation, the Apprentice Mini 4-Jaw Chuck comes complete with a comprehensive range of jaws, woodworm screw and threaded adaptor.

Experience the convenience of easily using ALL of the Jaws included with this innovative new chuck. Change instantly from #2 jaws for bowls, to #3 jaws for plates, to Pin Jaws for Candlestick to Step Jaws for Peppermill, to Jumbo jaws for bowl finishing. Eliminate the need for extra Chucks for different jaw applications.

Easy Wood Tools 4 Inch Easy Chuck. 1" -8TPI

• The easiest chuck you'll ever use!
• Snap-Lock Technology (SLT)
• Change jaws in 30 seconds or less
• Jaws can be placed in any configuration, no longer sequential
• Includes 1-3/8" Dovetail Jaws and 1"-8 tpi Easy Chuck

Versatile 9-piece Self Centering lathe chuck system for large lathes.

One of the easiest to use, best value chucks on the market!

The Barracuda2 is an easy to use, high-performance, full accessorized key operated self centering four-jaw lathe chuck system. You only need one hand to use this lathe chuck as the "T" handle jaw tightening key enables you to to tighten the jaws with only one hand while your other hand is free to support your work. 

Here is a full featured and complete key operated lathe scroll chuck system in a small package. 

The 4" SC4 Record Rower SC3 Professional Geared Scroll Chuck is built to meet the needs of professional woodturners, being capable of holding large work pieces while possessing the precision and compactness to handle more delicate work. A heavy duty chuck, the SC4 features an overall robust design with enclosed back, full indexing plate, and pinions driven by a long ball-ended hex key to make access easy even when large work pieces are mounted. The threaded insert design allows you to use your chuck on multiple lathes by changing inserts.

This self-centering, 3-jaw micro chuck is ideal for holding small projects from the inside or outside. 

Ideal for gripping pen mandrels, bottle stoppers and other small projects where a tenon is used for chucking.

Drill a perfectly centered hole in your blank on your lathe using this unique lathe chuck.

Get precision centering and gripping of your work at the tailstock end of your lathe. Ideal for holding mandrels, dowels and tenons up to 1/2" dia. Features smooth precision ball bearing operation. Available for tailstocks that are #2 Morse Taper.

Mount this drill chuck directly onto your headstock. Ideal for headstocks without a morse taper mount and applications that require the most secure headstock connection. The chuck includes a threaded 1 x 8tpi adapter plus a precision drill chuck and chuck key.

#2 Morse taper Drill Chuck for Delta and Jet lathe headstocks or tailstocks. A 1/2" grip can be used for grabbing small turnings or pen mandrels on the headstock or a drill bit in the tailstock.

For headstock and tailstocks. Quick and easy mechanism - used without a key.

The most accurate way to drill a pen or project blank is on your lathe. With these pen jaws, you can confidently drill blanks knowing you’ll get an accurate, centered hole every time. Drilling pressure is easily controlled using the tailstock handwheel, virtually eliminating exit hole breakout that’s common to plastics.

These jaws are a must-have for woodturners who enjoy turning small projects such as pepper mills, finials, boxes, ornaments and more. Ideal for gripping pre-drilled stock, they also provide easy access for tooling the base of the work piece. The dovetail profile on the exterior of the jaws provide a positive grip without marking.

Designed for turning large bowls and platters, these heavy-duty dovetail jaws provide the strength and grip you need for turning work up to 30" in diameter.

These jaws are a smaller version of the Standard 2" Jaws, featuring the same interior dovetail taper with hawk beak profile for a powerful grip on a spigot. The smooth dovetail taper on the exterior is ideal for expansion into a tapered recess such as the base of a bowl.

These jaws are a smaller version of the Standard 2" Jaws, featuring the same interior dovetail taper with hawk beak profile for a powerful grip on a spigot. The smooth dovetail taper on the exterior is ideal for expansion into a tapered recess such as the base of a bowl.

Remounting jaws are very popular as they allow you to re-chuck bowls and projects for light reshaping, removing tooling marks as well as creating decorative elements on the foot of the bowl. Soft rubber grippers hold the work comfortably in place without marring. Cast aluminum construction with 8 rubber grippers and 8 standard screws.

1" Jam chuck for Mini Salt & Peppermill diameter of the shaft - 1/4 of an inch

Numerous turning projects require a jam chuck however hand turning the chuck is time-consuming and not always accurate. This system solves the jam chuck problem. Insert the system s tough rubber chuck into your work then expand it by turning a nut to conveniently secure the workpiece.

Numerous turning projects require a jam chuck however hand turning the chuck is time-consuming and not always accurate. This system solves the jam chuck problem. Insert the system s tough rubber chuck into your work then expand it by turning a nut to conveniently secure the workpiece. This remarkable package includes five chucks. SIZES: 3/4", 1", 1-1/4", 1-1/2", and 2".

Numerous turning projects require a jam chuck however hand turning the chuck is time-consuming and not always accurate. This system solves the jam chuck problem. Insert the system s tough rubber chuck into your work then expand it by turning a nut to conveniently secure the workpiece. This remarkable package includes five chucks plus the Forstner bits to drill the jam chuck holes. Chuck and Bit sizes are 3/4", 1", 1-1/4", 1-1/2", and 2".

2 Open 7/8" wrenches to close collet on Maxi Mandrel
2 Open 7/8" wrenches to close collet on Maxi Mandrel styles PSI #PKM-ELC and #PKM-FLC

Adapter From M33 x 3.5 tpi headstock to 1" x 8 tpi male thread. Convert your spindle so that you can use chucks with different thread sizes. 

Live Tailstock Chuck Adapter - #2MT tailstock mount, 1" x 8tpi Chuck Mount