Kitless & Closed End Pen Making

Kitless & Closed End Pen Making Tools and Supplies

Products: 114 of 14
Drop items here to shop
Product has been added to your cart
  • Steel Dapping Block

    Steel Dapping Block

    A Jewelers Dapping Combination Block.This in an invaluable tool for the blank maker! This block features a wide range of U Channel, Oval, and Round depressions (48 depressions in all).  This block is a must have for making those watch part pen, coins and other embed style of pen blanks.  

    • 48 Total Depressions for forming, In 4 styles - U & V Channel, Round & Oval
    • 18 U Channel Depressions - 4mm to 21mm
    • Solid Steel Construction
    Not rated yet
    • $52.95
  • Handle Anything Chuck System for Closed End Projects

    Handle Anything Chuck System for Closed End Projects

    Our system allows you to create closed ends for a variety of projects, including bottle stoppers, tools, and kitchen utensils. It comes with threaded rods and Standard Pen Mandrel shafts, allowing you to use any bushing to achieve the desired turning size. You can expand the system to create closed-end pen kits, key chains, seam rippers, and custom twist caps.

    • The Handle Anything Chuck System lets you turn closed-end pens & handles for various woodturning projects.
    • Collet chuck base (PKHA01) is pre-threaded at 1" x 8tpi to mount on your lathe's headstock spindle.
    • Includes (2) Stepped Bushings so you have four size guides.
    • Includes (2) 7mm threaded mandrel shafts.
    Not rated yet
    • $36.95
  • Handle Anything Chuck Body

    Handle Anything Chuck Body

    This component of the Handle Anything Chuck system is a replacement for the chuck included with the system. It threads onto a 1in x 8tpi headstock thread.

    Not rated yet
    • $19.95
  • Bushing - 2 Step Handle Anything Chuck .800 & .949

    Bushing - 2 Step Handle Anything Chuck .800 & .949

    Replacement / extra bushing for the #PKHASET Handles Anything system. It has two-diameter bushings to match your project. .800in. For Niles Bottle Stoppers and .959 in. for PSI Standard Bottle Stoppers, Refer to the instruction sheet for compatible kit handle. Single Bushing.

    Not rated yet
    • $2.95
  • Bushing - 2 Step Handle Anything Chuck .745 & 1.025

    Bushing - 2 Step Handle Anything Chuck .745 & 1.025

    Replacement / extra bushing for the #PKHASET Handles Anything system. Has two-diameter bushings to match your project. .745in. and 1.025in. Refer to the instruction sheet for the compatible kit handle. Single Bushing.

    Not rated yet
    • $3.95
  • Handle Anything Mandrel Shaft for 7mm & 8mm Projects

    Handle Anything Mandrel Shaft for 7mm & 8mm Projects

    Turn a closed-end Pen Project using the Handle Anything Chuck System. Add a mandrel shaft and threaded plug inserts to turn 7mm, 8mm, 3/8 in., 10mm, 10.5mm, or 12.5mm closed-end pens or projects. Insert the appropriate female threaded plug in the end of your pen tube and secure it by threading it onto the appropriate mandrel shaft. Then slide the shaft into Handle Anything Chuck, secure it at the headstock end, and support it at the tailstock end while you turn.

    Not rated yet
    • $7.95
  • Mandrel Rod for Handle Anything Chuck 3/8in. x 16TPI

    Mandrel Rod for Handle Anything Chuck 3/8in. x 16TPI

    Replacement 3/8in. x 16 tpi Mandrel rod for the Handle Anything Chuck System (Item #PKHASET)

    Not rated yet
    • $6.95
  • Mandrel Rod for Handle Anything Chuck 1/2in. x 13TPI

    Mandrel Rod for Handle Anything Chuck 1/2in. x 13TPI

    Replacment 1/2in. x 13tpi Mandrel rod for the Handle Anything Chuck System (Item #PKHASET)

    Not rated yet
    • $7.95
  • Threaded Plug Inserts for Handle Anything Chuck - 7mm (6 Pack)

    Threaded Plug Inserts for Handle Anything Chuck - 7mm (6 Pack)

    Threaded plug Inserts for 7mm kits for use with Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of a 7mm kit tube and drill a blind hole with a 7mm drill bit to the correct depth to accommodate the entire length of the tube and plug. Glue the Tube with Plug into the blank and allow to cure. Thread to mount onto Handle Anything Chuck with #PKTC06 Mandrel Rod along with bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.

    Not rated yet
    • $12.95
  • Threaded Plug Inserts for Handle Anything Chuck - 8mm (6 Pack)

    Threaded Plug Inserts for Handle Anything Chuck - 8mm (6 Pack)

    Threaded plug Inserts for 8mm kits for use with Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of an 8mm kit tube and drill a blind hole with an 8mm drill bit to the correct depth to accommodate the entire length of the tube and plug. Glue the Tube with the Plug into the blank and allow to cure—thread to mount onto Handle Anything Chuck with #PKTC06 Mandrel Rod along with bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.

    Not rated yet
    • $12.95
  • Threaded Plug Inserts for Handle Anything Chuck - 3/8 in. (6 Pack)

    Threaded Plug Inserts for Handle Anything Chuck - 3/8 in. (6 Pack)

    Threaded plug Inserts for 3/8" kits for use with Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of an 3/8" kit tube and drill a blind hole with an 3/8" drill bit to the correct depth to accommodate the entire length of the tube and plug. Glue Tube with Plug into the blank and allow to cure—thread to mount onto Handle Anything Chuck with #XPKM-ELC Mandrel Rod and bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.

    Not rated yet
    • $14.95
  • Threaded Plug Inserts for Handle Anything Chuck - 10mm (6 Pack)

    Threaded Plug Inserts for Handle Anything Chuck - 10mm (6 Pack)

    Threaded plug Inserts for 10mm kits for use with Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of a 10mm kit tube and drill a blind hole with a 10mm drill bit to the correct depth to accommodate the entire length of the tube and plug. Glue Tube with Plug into the blank and allow to cure—thread to mount onto Handle Anything Chuck with #XPKM-ELC Mandrel Rod along with bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.

    Not rated yet
    • $14.95
  • Threaded Plug Inserts for Handle Anything Chuck - 10.5mm (6 Pack)

    Threaded Plug Inserts for Handle Anything Chuck - 10.5mm (6 Pack)

    Threaded plug Inserts for 10.5mm kits for use with Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of a 10.5mm kit tube and drill a blind hole with a 10.5mm drill bit to the correct depth to accommodate the entire length of the tube and plug. Glue Tube with Plug into the blank and allow to cure—thread to mount onto Handle Anything Chuck with #XPKM-ELC Mandrel Rod along with bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.

    Not rated yet
    • $14.95
  • Threaded Plug Inserts for Handle Anything Chuck - 12.5mm (6 Pack)

    Threaded Plug Inserts for Handle Anything Chuck - 12.5mm (6 Pack)

    Threaded plug Inserts for 12.5mm kits for use with Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of a 12.5mm kit tube and drill a blind hole with a 12.5mm drill bit to the correct depth to accommodate the entire length of the tube and plug. Glue Tube with Plug into the blank and allow to cure—thread to mount onto Handle Anything Chuck with #XPKM-ELC Mandrel Rod along with bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.

    Not rated yet
    • $14.95