Corner-B-Gone Pen Blank Rounding Jig
Save time and effort with this unique precision-engineered jig! The Corner-B-Gone jig is a simple yet elegant solution for knocking off the corners of your turning blank. Get a head start on turning your blank round on the lathe.
The jig can be used in 2 configurations to remove the edges. In the Bandsaw configuration, simply mount your blank between the metal blocks then, slide the blank edges through the blade, and turn the assembly to the next position; after 4 turns in less than a minute, your blank will be ready to turn. In the Disc Sander configuration, position the blank between the blocks and press each edge into the disc to round the corners.
Engineered with a quick-release threaded knob to quickly secure, assemble and disassemble your blank for machining. The jig can hold blanks or blank combinations up to 8in. Long and 1in. Square.
The system includes a quick-release knob, 2 multi-purpose blocks, 8 bushings, and a 12in. threaded shaft.
- Use in 2 Configurations - Sanding or Bandsaw
- Pre-Rounding makes turning easier and faster!
- Holds blank or multiple blanks up to 8"
- Quick Release threaded knob for easy removal
Corner-Be-Gone Rounding Jig